Alloy 400 (UNS N04400) is a solid-solution alloy that can be hardened only by cold working. This nickel-copper chemistry features a high intensity single-phase solid solution metallurgical structure.  It has high strength and toughness over a wide temperature range and excellent resistance to many corrosive environments. Monel 400 is one of the few alloys that maintains its strength in sub-zero or cryogenic temperatures. Alloy 400 has been widely used in applications requiring strong resistance to corrosive environments featuring acids, alkalies, and high temperature steam. especially marine and chemical processing. As a nickel-copper alloy, alloy 400 has excellent corrosion resistance in a wide variety of media. Alloy 400 is characterized by its general corrosion resistance, good weldability, and moderate to high strength in the tempered conditions. This alloy has excellent resistance to rapidly flowing and warm seawater, brackish water, and steam. It is particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated. This alloy is slightly magnetic at room temperature. Alloy 400 is widely used in the chemical, oil, and marine engineering industries.  Typical applications are Heat Exchangers, Steam generators, marine fixtures and fasteners, electrical and electronic components, Boiler feedwater heaters, de-aerating heaters, Marine industry and shipbuilding components such as propellers, shafts, fasteners Alloy 400 may readily be fabricated, machined and joined using standard processes. In general, cold-drawn or cold drawn and stress relieved material provides the best machinability and produces the smoothest finish. All standard welding techniques may be applied to alloy 400. The alloy may also be joined to dissimilar alloys employing appropriate consumables. In addition, joining is possible by brazing or soldering.ASTM B163,ASTM B165Alloy 400 (UNS N04400) Composition %

O.D	O.D Toleracne	W.T Tolerance
Inch	mm	%
1/8"	+0.08/-0	+/-10
1/4"	+/-0.10	+/-10
Up to 1/2"	+/-0.13	+/-15
1/2" to 1-1/2" , excl	+/-0.13	+/-10
1-1/2" to 3-1/2" , excl	+/-0.25	+/-10
Note: The tolerance can be negotiated according to the customer's specific requirements

Ni Nickel	Cu Copper	Fe lron	Mn Manganese	C Carbon	Si Silicon	S Sulfur
63.0 min	28.0-34.0	2.5 max	2.0 max	0.3 max	0.5 max	0.024 max

Maximum allowable pressure(unit: BAR)
Wall Thickness(mm)
		0.89	1.24	1.65	2.11	2.77	3.96	4.78
O.D(mm)	6.35	322	469	642	830
	9.53	207	297	409	539	723
	12.7	153	217	296	390	530
	19.05		141	191	249	336
	25.4		105	141	183	245	363	450
	31.8			111	144	192	283	349
	38.1			92	119	159	232	285
	50.8			69	89	117	171	209

Mechanical Properties
Yield Strength	28 Ksi min
Tensile Strength	70 Ksi min
Elongation(2" min)	35%

Alloy 400 has been widely used in applications requiring strong resistance to corrosive environments featuring acids, alkalies, and high temperature steam. especially marine and chemical processing. Typical applications are Heat Exchangers, Steam generators, marine fixtures and fasteners, electrical and electronic components.