Super Duplex stainless like S32750, is a mixed microstructure of austenite and ferrite (50/50) which has improved strength over ferritic and austenitic steel grades. The main difference is that Super Duplex has a higher molybdenum and chromium content which gives the material greater Higher chromium also promotes the formation of detrimental intermetallic phases, which are sensitive to 475°C embrittlement because of precipitation of the chromium-rich α’ phase, and to embrittlement by sigma, chi and other phases at higher temperatures.  Alloy 2507 (S32750) also has higher nitrogen content, which not only promotes the formation of austenite and increases the strength, but also delays the formation of intermetallic phases enough to permit processing and fabrication of the duplex grade. The grade is characterized by very good chloride corrosion resistance, combined with very high mechanical strength. It is particularly suited for use in aggressive environments such as warm chlorinated seawater and acidic chloride-containing media. Alloy 2507 (S32750) characteristics are as follows: ● Excellent resistance to stress corrosion cracking (SCC) in chloride-bearing environments ● Excellent resistance to pitting and crevice corrosion ● High resistance to general corrosion ● Very high mechanical strength ● Physical properties that offer design advantages ● High resistance to erosion corrosion and corrosion fatigue ● Good weldability S32750 is designed for demanding applications which require exceptional strength and corrosion resistance, which are found in chemical process, petrochemical, and seawater equipment. It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing. The grade is also suitable for hydraulic and instrumentation applications in tropical marine environments.ASTM A-789, ASTM A-790Super Duplex 2507 (UNS S32750) Composition %

C Carbon	Mn Manganese	P Phosphorous	S Sulfur	Si Silicon	Ni Nickel	Cr Chromium	Mo Molybdenum	N Nitrogen	Cu Copper
0.030 max	1.20 max	0.035 max	0.020 max	0.80 max	6.0-8.0	24.0-26.0	3.0-5.0	0.24- 0.32	0.50 max

O.D	O.D Toleracne	W.T Tolerance
Inch	mm	%
1/8"	+0.08/-0	+/-10
1/4"	+/-0.10	+/-10
Up to 1/2"	+/-0.13	+/-15
1/2" to 1-1/2" , excl	+/-0.13	+/-10
1-1/2" to 3-1/2" , excl	+/-0.25	+/-10
Note: The tolerance can be negotiated according to the customer's specific requirements

Mechanical Properties
Yield Strength	30 Ksi min
Tensile Strength	75 Ksi min
Elongation(2" min)	35%
Hardness(Rockwell B Scale)	90 HRB max

Maximum allowable pressure(unit: BAR)
Wall Thickness(mm)
		0.89	1.24	1.65	2.11	2.77	3.96	4.78
O.D(mm)	6.35	387	562	770	995
	9.53	249	356	491	646	868
	12.7	183	261	356	468	636
	19.05		170	229	299	403
	25.4		126	169	219	294	436	540
	31.8			134	173	231	340	418
	38.1			111	143	190	279	342
	50.8			83	106	141	205	251